Double Stage Reversible Crusher product description
Double-stage reversible crusher is mainly used for the fine crushing of solid materials with high humidity, which solves the fatal weakness of traditional hammer crusher that is easy to be blocked when crushing raw materials with high moisture. Designed to remove the sieve plate (sieve bar), the use of upper and lower two-stage double rotor structure, the back of the double crushing, the formation of the cavity hammer to hit the material, the material to hit the material, the first level of the first material will be crushed by the initial blow (coarse crushing), the second level of the second blow again crushing (fine crushing), the work of the material does not stain, do not clog the material, the hammerhead using carbide and manganese chrome mosaic casting technology, and the use of reversible work wear cycle is the ordinary high-chromium hammerhead of the 2-4 times; by the heavy flywheel, the heavy-duty flywheel to crush raw materials with high moisture, it is very easy to plug the material weaknesses. 4 times; rely on heavy-duty flywheel high-speed rotation inertia to do work, so the operation of low power consumption. It has the features of high yield rate (about 90% according to the characteristics of various materials), high powder rate, large crushing ratio and low operation cost.
It is suitable for fine crushing of solid materials with compressive strength less than 150Mpa and water less than 25%, such as pre-crushing of various materials before ball mill; crushing of shale and coal gangue in brick factory; crushing of various grades of iron ore in iron ore industry; crushing of coal gangue for backfilling in coal mining industry; and processing of raw materials in the no-burning brick industry for the production of porous bricks, large holes and thin-walled bricks, and sintered blocks and other industries.
Double Stage Reversible Crusher working principle
Double Stage Reversible Crusher Technical Parameters
| Model |
Feed size
(mm) |
Output granularity
(mm) |
production capacity
(t/h) |
Allowable Humidity |
Motor power
(kw) |
Shape Size
(mm) |
| 2PC2000×1600 |
≤200 |
adjustable
Finished 3mm Mix:
Below 2mm accounts for about 90%, of which the fine powder below 0.5mm (35 mesh) accounts for about 50%. |
240-280 |
＜25% |
355+355 |
6410×3420×4260 |
| 2PC1600×1400 |
≤180 |
120-180 |
220+220 |
6000×3100×3900 |
| 2PC1400×1200 |
≤150 |
100-120 |
132+160 |
5800×2660×3210 |
| 2PC1200×1000 |
≤130 |
80-100 |
110+132 |
4090×2230×2550 |
| 2PC1000×800 |
≤100 |
60-80 |
75+75 |
3950×1750×2280 |
| 2PC800×700 |
≤100 |
40-60 |
55+55 |
3490×1400×2250 |
| 2PC600×600 |
≤100 |
20-40 |
22+22 |
2880×1300×1650 |
| 2PC600×400 |
≤100 |
15-25 |
18.5+18.5 |
2350×930×1630 |
